7
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-583110-RevA
ECO #: W18-0083
DATE: 09/11/18
Carefully spread sides to slide OEM fog light into
position in pivot holes
Attach lower U Bracket to Upper Bracket. Reuse
factory adjustment hardware (screw, spring and
plastic nut)
Fig 14
Fig 13
13. Determine if vehicle is equipped with an adaptive cruise control, (ACC).
NOTE:
Install the ACC assembly onto Bumper
before mounting Bumper to end of frame.
Vehicles without ACC:
- Attach the ACC Removable Window to the back of the bumper using (2) 6mm x 25mm Hex Bolts, (4) 6mm Flat
Washers, (2) 6mm Lock Washers and (2) 6mm Hex Nuts,
(Figure 15)
.
- Continue to
Step 13
.
Vehicles with ACC:
- Select the ACC Plastic Cover and the ACC Support Bracket A,
(Figure 16)
. Insert (3) 6mm x 25mm Button
Head Bolts through the ACC Plastic Cover, the adaptive cruise control and out through the ACC Support
Bracket A. Secure with (3) 6mm Flat Washers, (3) 6mm Lock Washers and (3) 6mm Hex Nuts,
(Figure 16)
.
- Next, attach the ACC Support Bracket B to Bracket A using (2) 6mm x 25mm Hex Bolts, (4) 6mm Flat Washers,
(2) 6mm Lock Washers and (2) 6mm Hex Nuts,
(Figure 17)
.
- Attach the ACC assembly to the back of the bumper using (2) 8mm x 20mm Hex Bolts, (4) 8mm Flat Washers
and (2) 8mm Nylon Lock Nuts,
(Figure 18)
.
ACC Support Bracket A
Adaptive Cruise Control
ACC Plastic
Cover
Fig 15
Fig 16
