14
Figure 16. Typical Facing for the Fireplace - General.
P
lanning
y
our
i
nStallation
The DV62 may be installed
with an optional front.
The front lift on and off
of the fireplace, providing
access to the fireplace for
regular maintenance and
service, see Optional Front
Installation.
You
have
3
possible
scenarios when installing
facing to your fireplace.
Care must be taken to
ensure proper clearances are
maintained. Clearances are
required between optional
front and any stone work
applied to your fireplace
installation.
Failure
to
maintain this clearance will
lead to elevated operating
temperatures and possible
discoloration of materials
and or front.
Figure 17. Option 1 - Fireplace Facing Without Optional Front Installed
i
nstaLLation
oF
F
iRepLace
F
acing
:
When installing the DV62 without the optional door sets, install the inner trim kit that is supplied with the unit.
The inner trim is fastened to the non-combustible wall board that comes with the unit and the rock/tile facing
covers over the trim flange as with any typical drywall flange. The rock or tile facing can be any thickness, but
once this unit is installed, you can no longer install the optional door sets
Three (3) possible installations include:
1) For fireplace facing without an optional front installed.
2) For fireplace facing greater than 1” thick with an optional front installed.
3) For any fireplace less than 1” thick (total facing and non-combustible board combined) with an optional
front installed.
Figures 17 to 19 highlight the relationships between the fireplace, optional front, and facing installed.
NOTE
:
Optional Door Front cannot be installed with the Porcelain Firebox Liner option.
