3. A
SSEMBLY
W
ESTFIELD
- MKX100-S
ERIES
G
RAIN
A
UGERS
MKX100-53/63/73/83
24
30908 R3
3.2.4. I
NSTALL
THE
T
RACK
S
HOE
, T
RACKSTOP
, & L
IFT
-A
SSIST
A
RM
1. Slide the double roller track shoe onto the track from the spout end of the
tube.
2. Slide track shoe along full length of track to make certain there is no binding
and that track ends are properly aligned. The upper and lower tracks must be
aligned to allow track shoe to roll smoothly over this joint.
3. Attach
the
lift-assist
arm to center hole on track shoe (Figure 3.8) with one
3/4” x 6-1/2” bolt and locknut.
Do not over-tighten
. Tighten snug only; this
bolt acts as a pivot point.
Figure 3.8 Installing the Trackstop and Lift Assist
4. Bolt the trackstop to the track (Figure 3.9, Figure 3.10) using two 7/16” x 1-1/
4” bolts, locknuts, and flat iron washers.
Note:
The flat iron washers must be on top of track, and the trackstop must be centered
on the track.
Summary of Contents for MKX100 SERIES
