W
ESTFIELD
- MKX100-S
ERIES
G
RAIN
A
UGERS
3. A
SSEMBLY
MKX100-53/63/73/83
30908 R3
17
3. Assembly
Before beginning assembly, familiarize yourself with all the sub-assemblies and
hardware making up the auger. Have all parts on hand and arrange them for
easy access. Carry out assembly in a large open area with a level surface.
Important:
Always have 2 or more people assembling the equipment. Because of the
weight, do not attempt assembly alone.
Augers are available in various combinations. In most cases, the following
instructions will apply to all augers. Where the assembly information varies,
additional instructions will be included and will be indicated with an arrow.
Note:
Non-driveline options such as the hydraulic winch and hydraulic/electric power
swing are compatible with all other options that can be installed on the auger.
Driveline options (Right angle Drive, 540 RPM PTO Reverser) are not compatible
with other driveline options, but are compatible with non-driveline options such
as the hydraulic winch and hydraulic/electric power swing.
3.1. GENERAL ASSEMBLY
1. Select an assembly area that is level, has a firm or hard surface and is free of
debris. Be sure it is large enough to allow access from all sides when the
components are being assembled.
2. If assembling inside a building, be sure the ceiling is at least 14’ (4.27 m) high
to provide clearance when installing the undercarriage
3. Bring all the tools, blocks, stands, jacks, and hoists to the assembly area
before starting.
4. The following tools and equipment are required to assemble the machine:
• 11-14 Support stands (tube section supports, three per tube)
• Four Saw horses (1200 lb / 544.3 kg bearing capacity)
• One Standard socket set and wrench set
• One Torque wrench
• One Standard 25’ (7.62 m) tape measure
• One 2’ level
• One 8” level magnetic
• Two C-clamps or vise grips
• One Picker with minimum reach of 12’ (3.66 m) and 4000-6000 lb
(1814 - 2722 kg) lifting capacity
• One 100’ (30 m) measuring tape
• One Tire gauge
• One Tire chuck
• 6-10 Wood blocks (2x4's or smaller)
WARNING Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
Summary of Contents for MKX100 SERIES
