Westfalia 96 30 49, Original Instructions Manual

Page: 15 / 28

15
•
Caution: Allow for run down time of the cutter blade after turning the
biscuit jointer off. Wait for the machine to come to a complete stop before
removing from the work piece.
•
Do not force the biscuit jointer. Your biscuit jointer will do better job if you
take it slowly.
•
Avoid cutting nails and screws. Inspect the work piece and remove all nails
and screws before cutting.
•
Always switch off the biscuit jointer and then unplug before adjusting,
while changing the attachments, when not in use and after work and while
maintaining.
•
Keep the ventilation slots clean and free from foreign objects. Make sure
that dust cannot enter into the mechanical parts.
•
Do not use a damaged blade. Replace it with a suitable new one.
•
Do not work on pieces too small to safely clamp.
•
Do not disassemble the machine and do not try to repair it yourself. Have
the unit repaired by a professional or turn to our customer support
service.
•
Always use original replacement parts.
Additional safety instructions for batteries and battery chargers
WARNING: Lithium-ion batteries pose a risk of fire, burns and explosion if
improperly used, stored or charged.
Use charger properly.
•
Before charging the battery, follow the instructions in the relevant section
of this user manual for the correct use of the battery charger.
•
Do not use the charger to charge batteries other than the ones supplied.
Keep the battery charger clean; Foreign bodies and dirt can cause a short
circuit and clog the ventilation holes. Failure to follow these instructions
could result in overheating or fire.
•
Allow batteries to cool for 15 minutes after charging or intensive use.
Failure to follow these instructions could result in overheating or fire.
•
Only charge the batteries in chargers recommended by the manufacturer.
A charger designed for a particular type of battery may present a fire
hazard if used with other batteries. Only charge the lithium-ion battery
with the charger included in the scope of delivery or a charger specially
designed for this item.
•
Only use the rechargeable batteries provided for this purpose in the power
tools. The use of other batteries can lead to injuries and the risk of fire.