24
Maintenance
hood and the spool. These parts have to be replaced depending on
the kind of duration or usage.
Check the gear lubrication, especially during longer periods of work,
and severe dust exposure. So you will avoid excessive wear and
damage to the machine.
Gear Lubrication
The gear case must be lubricated regularly. It is advisable to
lubricate the gear case every 15 to 20 hours of operation. Use
Lithium machine grease.
Unscrew the screw with the included hex
key.
If there is no grease in the opening, fill it with
approx. 5 g grease into the hear housing. Re-
tighten the opening with the hex key.
Make sure not to overfill the gear housing.
Sharpening the Brush Cutter Blade
The brush cutter blade must be sharpened by a professional only.
Improperly sharpened or blunt cutting edges may cause the blade
to break or torn.
Summary of Contents for 92 21 48
