10
Zusammenbau
5. Montieren Sie die Schutzhaube
(2) auf die entsprechende Halte-
rung, wie im Bild dargestellt.
6. Ziehen Sie die Innensechskant-
schrauben mit dem beigefügten
Schlüssel handfest an.
Verwendung des Tragegurtes
Das Gerät muss immer mit einem geeigneten Tragegurt verwendet
werden.
1. Haken Sie das Gerät an den Karabinerhaken und balancieren Sie
das Gerät zuerst bei ausgeschaltetem Motor aus.
2. Zur besseren Stabilität führen Sie
das Ende des Gurtes, wie im Bild
rechts gezeigt, nochmals zurück
durch die erste Schnallenöffnung.
Ziehen Sie das Ende fest.
Somit wird verhindert, dass der
Gurt unter der Last des Gerätes
aus der Schnalle durchrutschen
kann.
3. Schieben Sie den Stift in die
Öffnung. Somit ist der Karabiner-
haken sicher eingehakt.
4. Ziehen Sie den Stift heraus, um den
Karabinerhaken herauszunehmen.
Schalten Sie das Gerät immer aus, bevor Sie den Karabinerhaken
vom Tragegurt lösen. Achtung! Es besteht Unfallgefahr.
Hängen Sie das Gerät am Karabinerhaken ein. Das Schneid-
werkzeug darf bei normaler Arbeitshaltung gerade noch den Boden
berühren. Bei Bedarf lockern Sie die Aufhängeöse (10) mit dem
Innensechskantschlüssel und verschieben Sie diese nach vorne
oder nach hinten.
Summary of Contents for 92 21 48
