Programming
12
Position of the DIP Switches
The DIP switches are used to set the running time and to make fine
adjustment of the sliding gate opener.
Disconnect power supply from the gate opener before changing the
setting! Always keep away from the moving path of the sliding gate
opener in order to avoid injuries in case of unexpected gate moving.
DIP-Switch 1 and 2
– Run Time for Pedestrian Traffic Mode
DIP Switch 1: ON = 2 Seconds
OFF = 0 Seconds
DIP Switch 2: ON = 4 Seconds
OFF = 0 Seconds
Factory Default of both switches is OFF = The function for the
pedestrian mode is disabled.
Example: Run time of the gate opener for the pedestrian traffic
mode = 6 Seconds (2 + 4 Seconds).