4
Safety Notes
Persons with limited physical, sensorial or mental abilities are not allowed
to use the unit, unless they are supervised and briefed for their safety by a
qualified person.
Never direct the cordless screwdriver towards people, animals or plants.
Do not point the screwdriver towards equipment containing electronic
components.
Do not allow water or any other liquids to enter the unit.
Make sure the voltage corresponds to the type label on the battery
charger.
The battery charger is designed for charging the cordless screwdriver
only. Do not charge other machines with this charger. Do not charge the
battery of the cordless screwdriver with other chargers.
Protect battery and battery charger from humidity. Do not operate the
battery charger outdoors.
When not in use and before cleaning and servicing, disconnect the battery
charger from the power supply.
Take special care of the battery. Avoid dropping it onto any hard surface
and do not expose it to pressure or any other form of mechanical stress.
Keep the battery away from extreme heat and cold.
Do not open or attempt to repair the battery or the battery charger. If any
parts are damage have them repaired by a qualified technician or contact
your customer service.
Only charge, operate and store the battery at an ambient temperature
between 10 ºC and 30 ºC.
Attention, danger! Never short-circuit the battery or expose it to moisture.
Do not store it together with any metal parts which could short-circuit the
contacts. The battery could overheat, start burning or explode.
Before starting any work on walls, floors or similar, make sure that all
power lines in the work area are switched off at the main switchboard.
Before drilling inspect the location of the proposed drill hole for any utility
lines (e. g. water, gas, or power). Use a suitable device such as a metal or
electricity line detecting device.
Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
