10
Operation
Engaging the Hammer Function
With the hammer/drill ring (5) the hammer function of the machine is engaged.
To turn on the hammer function, turn the ring until the hammer symbol is
directly over the marking.
Selecting the Gear
This machine is equipped with a two gear transmission. With the gear switch
(3) on top of the machine you can change the gears.
Use the high speed for drilling and hammer drilling, and the lower speed for
driving screws. In the first gear the machine has 25 Nm and in the second gear
12 Nm.
Cleaning and Maintenance
Remove the battery before undertaking any cleaning or maintenance
work.
Use only a moist cloth to clean the unit. Do not use aggressive chemicals
as benzene or thinner, which may dissolve plastic parts, or abrasives.
Always keep the ventilation louvers clean and free from obstructions.
From time to time apply a light coat of oil to the drill chuck. Otherwise, the
machine requires no maintenance or lubrication.
The battery can be recharged for up to 500 times if treated carefully.
However, over time the battery’s performance can deteriorate. If neces-
sary you can purchase replacement batteries from Westfalia.
In the case of malfunctions, please have the unit repaired by a profes-
sional or turn to our customer service.
Batteries do not belong in the household
garbage.
For battery disposal please check with your
local council.
