7
Safety Notes
Make sure the voltage corresponds to the type label on the unit.
Persons with limited physical, sensorial or mental abilities are not allowed
to use the unit, unless they are supervised and briefed for their safety by a
qualified person.
Only plug the battery charger to 230 V~ mains power. Recharge the
battery only with the provided charger.
Before starting any work on walls, floors or similar, make sure that all
power lines in the work area are switched off at the main switchboard.
Inspect the proposed drill hole location for any utility lines (e. g. water, gas,
power) before drilling. Use a suitable device such as a metal or electricity
line detecting device.
Protect battery and battery charger from humidity. Do not operate the
battery charger outdoors.
When not in use and before cleaning and servicing, disconnect the battery
charger from the power supply.
Take special care of the battery. Avoid dropping it onto any hard surface
and do not subject it to pressure or any other form of mechanical stress.
Keep the battery away from extreme heat and cold.
Do not open or attempt to repair the battery or the battery charger. If any
parts are damaged, have them repaired by a qualified technician or
contact your customer service.
Only charge, operate and store the battery at an ambient temperature
between 10º C and 30º C.
Do not disassemble the machine and do not try to repair it yourself. The
machine does not contain parts serviceable by you.
Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
