16
Operation
Bottom Blade
Middle Line
Upper Blade
Hole
Locking Hole
Plastic Ring
175 mm
60 mm
Middle Line
Marking Rib
Locking Pin
Gear Wheel
Gear Wheel
Locking Pin
Middle Line
Marking Rib
Installing the Shrub/Hedge Blade
1. Turn the gear wheel so that the middle line of the marking rib on the gear
wheel is exactly positioned downwards or upwards, as shown in the upper
figures.
2. Move the upper blade of the shrub/hedge blade until the middle line of the
plastic ring is positioned exactly in the centre of the hole.
3. Place the four locking holes of the shrub/hedge blade onto the four locking
pins on the gear carriage. Make sure the cam of the gear wheel complete-
ly snaps into the plastic ring.
