3
Safety Notes
Only plug the battery charger to 230 V mains power. Recharge the battery
only with the provided charger.
Before starting any work on walls, floors or similar, make sure that all
power lines in the work area are switched off at the main switchboard.
Inspect the proposed drill hole location for any utility lines (e.g. water, gas,
power) before drilling. Use a suitable device such as a metal or electricity
line detecting device.
Protect battery and battery charger from humidity. Do not operate the
battery charger outdoors.
When not in use and before cleaning and servicing, disconnect the battery
charger from the power supply.
Take special care of the battery. Avoid dropping it onto any hard surface
and do not subject it to pressure or any other form of mechanical stress.
Keep the battery away from extreme heat and cold.
Do not open or attempt to repair the battery or the battery charger. If any
parts are damaged have them repaired by a qualified technician or contact
our customer service.
Only charge the battery at an ambient temperature between 10º C and
40º C. A charged battery can be used to power the machine under ambient
temperature conditions between 0º C and 50º C.
When not in use, store the battery in a dry place between 10º C and 40º C.
Important Danger! Never short-circuit the battery or expose it to moisture.
Do not store it together with any metal parts which could short-circuit the
contacts. The battery could overheat, start burning or explode.
Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
Batteries do not belong in the household
garbage.
For battery disposal please check with your
local council.
