Westfalia 34 60 72, Instruction Manual

Page: 13 / 15

8
Operation
Hints for appropriate Stirring of the Used Material
ƒ Thoroughly stirring of the different compositions that are nowadays in use,
prevents structural damage and expensive follow-up costs. Therefore you
should observe some urgent basic rules.
ƒ Tough and weighty materials overcharge drilling machines. Please utilise
specially-designed stirring machines for this purpose, e.g. this, with optimally
tuned revolution speed and power transmission.
ƒ
Please consider the flow direction when selecting the stirrer:
ƒ Temper materials in powder form from the bottom up, and fluid material top-
down or in parallel flow direction. Immersing the tool, a reduced revolution
speed prevents splashing.
ƒ
For your own safety, please wear goggles and, if necessary, a dust mask.
Never temper solvents with a flashpoint below 21° C. Please note processing
and safety instructions of material e.g. machine manufacturers.
Maintaining and Cleaning
ƒ Clean the machine only with a lightly moistened cloth. Do not clean the
machine with abrasives or aggressive chemicals.
ƒ
After use, clean the agitator paddle immediately, before the stirred material
has hardened.
ƒ The stirring machine is maintenance-free and does not require any
lubrication.
Technical Data
Nominal Voltage 230 V
Frequency 50 Hz
Nominal Power 1200 W
No Load Speed 300 - 800 min
-1
Total Weight 5.5 kg
Protection Class II
Sound Pressure Level 79.4 dB(A)
Sound Power Level 90. dB(A)
Hand Arm Vibration 8.14 m/s
2