![background image](http://html.mh-extra.com/html/westfalia/04040746288894/04040746288894_original-instructions-manual_963634019.webp)
15
Operation
Before first Use
Remove the roller sander and all accessories out of the packaging and check
all parts for damage in transit. Keep packaging materials out of reach of
children. There is risk of suffocation!
Intended Use
This tool may only be used for dry sanding work. This tool can be used to sand
rough material or to remove paint, varnish or other finishes.
Changing the Abrasive Sleeve
Warning: Remove the plug from the power source before installing or
removing a sanding roller.
1. Lift the two roller end cover hasps (7)
away from the main housing (A).
2. Release the RIGHT hasp from the roller
end cover (9).
3. Pull the cover out from the main
housing and flip it toward the front of
the tool using the LEFT hasp as a
hinge.
4. Slide the roller (10) off the roller shaft
(5).
5. Remove the old abrasive sleeve and
slide the new abrasive sleeve onto the
roller.
Note:
Rotate the roller sleeve counter
clockwise as you slide the roller sleeve
off or onto the roller. Make sure it is
centred on the roller and is not
overhanging one end of the roller.
9
A
7
B
10
7