700 Shimohinata, Kanuma, Tochigi 322-8666, Japan TEL: +81 289 64 3520 FAX: +81 289 62 1135
Operation Guide
Ultrasonic Polisher
DOWN key
Reduce
the power level.
DOWN key
UP key
Increase
the power level.
UP key
ON / OFF key
Start and stop
the handpiece.
CLAMP key
UNCLAMP key
Main power switch
Power ON:
Press [Main power switch]
Mode selection:
Select [CLAMP key] or [UNCLAMP key]
The LED on the control panel lights up.
The LED of the selected key lights up.
Displays the power level.
(Can be adjust during vibrating)
1
2
Power level adjustment:
Press [DOWN key] or [UP key]
3
Startup:
Press [ON / OFF key] or use the foot switch
4
The ON / OFF key and the LED on the
handpiece light up when starting up.
■
CLAMP mode (low power)
for ceramic fiber grindstone
(also used for one piece tool)
■
UNCLAMP mode
for electroplated diamond file
(One piece tool)
When using the foot switch
• Factory default setting: Pressing the foot switch to start
and releasing it to stop.
• The setting can be changed to pressing the foot switch
to start and pressing it again to stop. See attached
operation manual to check how to change the setting.
If it is activated by a foot switch, it can only be stopped by a foot
switch. See reverse side for connecting.
See attached operation manual
for details.
PR-K350E Ver.1 '20.09.XX.N
