Western Shelter Systems AIRFRAME SENTINEL II, Technical Manual

Page: 4 / 37

FIGURES
Figure Page
1.1 SW-SII tent diagram 1-1
1.2 Checklist 1-2
2.1 Inflation valve closing 2-1
2.2 Simultaneous inflation kit diagram 2-5
2.3 Connecting the tube to the inflator 2-5
2.4 Pressing the tube into the inflation valve. 2-5
2.5 Unblocking spacer rod (Purlin) clamp 2-7
2.6 Spacer rod (Purlin) engagement by means of union joint 2-7
2.7 Spacer rod (Purlin) installed 2-7
2.8 Stake and guy line arrangement for SW-SII arches tent 2-7
2.9 Insulation liner diagram 2-8
2.10 Assembly sequence of inner insulating liner for SW-SII arches tent 2-9
2.11 Assembly sequence of the sunshade 2-10
2.12 Installed sunshade diagram 2-11
2.13 Noose and knot on guy rod diagram 2-11
2.14 Dust mat diagram 2-12
2.15 Electric system diagram 2-13
2.16 Switch on ceiling light 2-13
2.17 Air ventilation tube arrangement 2-14
2.18 Entrance module pole assembly diagram 2-15
2.19 Connecting corridor pole assembly diagram 2-16
2.20 Configurations of use of the window 2-17
3.1 Inflator tube engagement for deflation 3-1
3.2 Inflation valve tube pressure engagement 3-1
3.3 Arrangement of the arches inside the deflated tent 3-2
3.4 First fold (right-hand side) 3-2
3.5 Second fold (overlapping) 3-3
3.6 Rolling 3-3
3.7 Positioning in the bag 3-3
5.1 Repair kit contents table 5-1
5.2 Connection by means of wing bolt 5-2
5.3 Arch types 5-3
ILLUSTRATED PROCEDURES
ILLUSTRATED PROCEDURE FOR TENT DEPLOYMENT from 2-2 to 2-4
ILLUSTRATED PROCEDURE FOR TENT ERECTION 2-6