WD ARRAY MANAGEMENT SETUP
CHAPTER 5: RAID MONITORING AND MAINTENANCE WITH AMS - 54
USER MANUAL
Synchronize an Array
WD uses the term
synchronization
to mean an automated process of checking and correcting
data and parity. Unlike a Rebuild, Synchronization is a maintenance operation.
Synchronization applies to RAID 1. It takes place when an array is first created and then,
optionally, on a regularly scheduled basis to maintain content integrity.
Scheduled Synchronization
Schedule a time for synchronization when the RAID is least busy reading and writing data.
The early morning hours are often a convenient time.
To enable scheduled synchronization:
1. In Tree View, select the RAID Machine
icon. In Information View, scroll down to
the bottom.
2. Check the
Enabled
box.
3. Click on the radio button beside the time interval (by day, week or month) you want.
4. Based on the time interval you selected, enter the clock time, day of the week or day of the
month for the synchronization process to begin.
5. When you are done, click the
Change
button.
The Synchronization Schedule is set. If the Schedule is disabled, it will remember its current
settings.
