WD ARRAY MANAGEMENT SETUP
CHAPTER 3: INITIAL SETUP - 16
USER MANUAL
The Administrator can assign more or fewer rights to other Users but cannot change their
passwords.
3. Type a
User name
and
Password
in their respective fields.
Check all the appropriate boxes to set access rights. Click the
Submit
button when you are
done.
The new user's name appears on Tree View.
Create an Array
The available RAID selection depends on the number of hard drives available.
The table below lists the RAID levels available with WD SATA RAID Controller and the
number of drives required.
See Appendix A: RAID Concepts for a more detailed description.
Table 2. RAID levels available on WD SATA RAID Controller
1. In Tree View, click the + to the left of the Controller
icon to see the Disk View icon.
Look under the Disk View
icon to see the unassigned disk drives. Unassigned drives
have this
icon.
2. Right-click on the Array View
icon and select
New Array
from the popup menu. A
Create Array icon appears.
RAID Level
Name
Minimum drives
Maximum drives
0
Striping
1
4
1
Mirroring
2
2
