WD ARRAY MANAGEMENT SETUP
CHAPTER 3: INITIAL SETUP - 13
USER MANUAL
Remote AMS Login
Remote AMS works over your network. Therefore it requires additional steps the first time
you log on. Launch Remote AMS. When the AMS user interface appears:
Figure 15. Make a New RAID Server
1. Right-click on the My Console icon
and:
- Select
New > Server
from the popup menu.
- Click the New Server
icon in the Toolbar.
A RAID Server icon appears.
Figure 16. RAID System Configuration Box
2. Click on the RAID Server
icon. In Information View, type in the IP address of the
computer where the Message Server software is installed.
If the Message Server software in installed on the monitoring PC (the PC you are now
working on), you can use the default 127.0.0.1 IP address.
