WD ARRAY MANAGEMENT SETUP
CHAPTER 3: INITIAL SETUP - 10
USER MANUAL
Chapter 3: Initial Setup
After you have completed installation, you must set up your AMS Monitoring Utility to work
with your RAID.
Launch AMS
Figure 11. AMS on the Desktop and in the Start Menu
To Start AMS, click on a Desktop icon or go to
Start > Programs > WD Array Management
and select:
Local AMS
—Use to monitor and manage the WD SATA RAID Controller in your PC
Remote AMS
—Use to monitor WD SATA RAID controllers over your network
Note:
If you only installed the Message Server, this shortcut does not appear. The Message
Server works only through network connections and has no user interface. Go to the RAID
PC or a Networked PC to setup AMS.
