Ibex-RT-310 and Ibex-RT-320 Series User Guide
Westermo Network Technologies
23
5
Specifications
5.1
Interface Specifications
DC, Power port
Ibex-RT-310-LV and Ibex-RT-320-LV
Ibex-RT-320-HV
Connector
M12 A-coded male
Rated voltage
24 VDC
72 to 110 VDC
Operating voltage
16 to 30 VDC
50 to 138 VDC
Rated current
0.6 A
0.2 A
Rated frequency
DC
Inrush current, I²t
39 mA
2
s at 24 VDC
4 mA
2
s at 72 VDC
13 mA
2
s at 110 VDC
Startup current
1
2 x nominal current
Polarity
Reverse polarity protected
Redundant power input
No
Conductor cross section
(flexible)
> 0.5 mm² (AWG 20)
Cable temperature rating
-40 to + 70°C
Shielded cable
Not required
Table 10 Interface Specification
PoE (PoE Powered device - Ibex-RT-310-LV and Ibex-RT-320-LV only on X2)
Connector
M12 X-coded female
Device mode
A and B
Rated voltage
48 VDC
Operating voltage
37 VDC to 57 VDC
Power classification
Class 3
Table 11 PoE Specification
Ethernet TX
Connector
M12 X-coded female
Electrical specification
IEEE std 802.3
Data rate
10 Mbit/s, 100
Mbit/s, 1000 Mbit/s manual or auto
Duplex
Full or half, manual or auto
Transmission range
Up to 100 m with CAT5e cable or better
Cabling
Shielded cable CAT5e or better is recommended
Conductive chassis
Yes
Table 12 Ethernet Specification
NOTE
The product is to be connected to internal Ethernet networks without exiting a
facility and being subjected to TNVs.
1
Recommended external supply current capability for proper startup