Westen star master 240 Fi, Instructions For The User And The Installer

Page: 47 / 108

47
925.476.4 - EN INSTRUCTIONS PERTAINING TO THE INSTALLER
20. PARAMETERS SETTING
To set the boiler parameters press the R and
-
buttons together for at least 6 seconds. When the function is activated,
the display shows “ F01 ” alternated with the value of the parameter.
Description of parameter Default value
F01
Type of gas boiler
10 = sealed chamber
10
F02
Type of gas
00 = natural (metane) - 01 = LPG
00 o 01
F03
Hydraulic system
00 = instantaneous appliance
00
F04
Programmable relay 1 setting
2 = zone system (See SERVICE Instructions)
02
F05
Programmable relay 2 setting
13 = “cool” function for external air-conditio-
ning system (See SERVICE Instructions)
04
F06
External sensor programmable input setting
(See SERVICE Instructions)
00
F07...F12 Manufacturer information 00
F13
CH max. heating output (0-100%) 100
F14 D.H.W. max. heating output (0-100%) 100
F15
CH min. heating output (0-100%) 00
F16
Maximum temperature setpoint setting
00
= 85°C -
01
= 45°C
00
F17
PUMP OVERRUN TIME
(
01-240 minutes
)
03
F18
Minimum burner pause in central heating
mode -
00=10 seconds
03
F19 Manufacturer information 07
F20 Manufacturer information --
F21...F22 Manufacturer information 00
F23 Maximum D.H.W. setpoint 60
F24 Manufacturer information 35
F25 Lack of water safety device 00
F26...F29
Manufacturer information
(read-only parameters)
--
F30
Manufacturer information 10
F31 Manufacturer information 30
F34...F41
Diagnostics (See SERVICE Instructions) --
Final
parameter
Calibration function activation
(See SERVICE Instructions)
00
WARNING:
do not modify the values of the “manufacture information” parameters.
Parameters setting
• Press
+/-
buttons for scrolling parameters;
• Press
+/-
buttons to change the single parameter value;
• Press the
P
button to save changes, the display shows “
MEM
”;
• Press the button to leave the function without saving, the
display shows “
ESC
”;
0801_0203 / CG_2017