background image

 Equipment Issue B

030-101522 Rev. C, September 2005

Section 311-610-20B

0509IBRC

Page 1 of 26

Copyright 2005 

Westell, Inc. All rights reserved. Printed in the United States of America.  

*CLEI is a trademark of Telcordia Technologies.  200 MECHANICS in a registered trademark of Westell, Inc.

DS1 Network Interface Unit with Performance Monitoring

Model 3116-10 Issue B

Part of the Westell PROACT

t

 Family

CLEI* Code:  T1L8AC0AAA

CONTENTS

PAGE #

1. GENERAL

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

2. APPLICATIONS

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

3. TRANSMISSION FEATURES AND OPTIONS

3

. . . . . 

4. LOOPBACK FEATURES AND OPTIONS 

5

. . . . . . . . . 

5. SECTIONALIZATION ALARM FEATURES

7

. . . . . . . 

6. PERFORMANCE MONITORING & REPORTING

8

7. HARDWARE OPTIONS & FEATURES

9

. . . . . . . . . . . 

8. INSTALLATION

11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

9. SET-UP AND OPERATION 

13

. . . . . . . . . . . . . . . . . . . . 

10. TESTING & TROUBLESHOOTING

21

. . . . . . . . . . . . . 

11. CUSTOMER & TECHNICAL SERVICES 

21

. . . . . . . . 

12. WARRANTY & REPAIRS

21

. . . . . . . . . . . . . . . . . . . . . . 

13. SPECIFICATIONS

22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

1.

GENERAL

1.1

Document Purpose

This document describes the Westell 3116-10 DS1 Network In-
terface Unit (NIU) with Performance Monitoring, shown in
Figure 1.

1.2

Document Status

Whenever this practice is updated, the reason will be stated in
this paragraph. Revision C updates Figure 5. Revision B up-
dated Paragraph 4.7.1, 5.3.2.1, 6.3 and 7.1.1, added the CLEI

code, and removed the previous Paragraph 4.2. This practice re-
flects the Issue B equipment, which provides the following
improvements:

Manufacturability

PM storage increased to 90 days

Event log increased for 200 events

Test pattern generation

XMT binder level added

ESF and B8ZS LEDs added

SPRM generation added

Craft port Notepad screen added

LED labels changed for improved path identification

Application modes combined

Figure 1.

3116-10 NIU with Performance Monitoring

B90-311610

125641

NIU-PM

PWR

ESF

FAC

CPE

LB

C

P

E

 

B

R

G

TP1

TP2

MAN

LB

B8ZS

F

A

C

 

B

R

G

- NOTE -

Hereafter, the 3116-10 DS1 Network Interface Unit with
Performance Monitoring also may be referred to as the NIU,"
the unit," or 3116-10."

1.3

Product Purpose and Description

The Westell 3116-10 Issue B T1 Network Interface Unit with
real-time Performance Monitoring serves as an interface be-
tween a T1 metallic span, or a customer premises-based fiber
multiplexer, and the intra-building Customer Premises Equip-
ment (CPE). The 3116-10 Issue B is a member of the Westell
PROACT family of T1 NIUs that provide standard maintenance
loopback plus collection and reporting of DS1 performance sta-
tistics. These performance monitoring capabilities allow service
providers to 

PROACTively"

 respond to facility performance

degradation, thereby improving the availability of Hi-Cap T1
circuits.

Summary of Contents for 3116-10 Issue B



























Reviews: