Westell 3116-10 Issue B, Manual

Page: 26 / 26

Section 311-610-20B
030-101522 Rev. C
26 0509IBRC
NIU QUERY AND RESPONSES VIA TL1 COMMANDS
APPENDIX C
1. TL1 Commands
TL1 Command and responses are transmitted in the Facility Data Link using the command SND−CMD−FDL via the
modified LAPB protocol. Below is a short glossary of characters used in the TL1 Command:
<cr>Carriage Return
<lf>Line Feed
^Space
<ctag> Correlation tag. This is an optional field and may be left blank
ED-T1 Command
This command is used to provision the PROACT unit
Command:
ED − T1:::<ctag>:::<optnm>=<optstg>;
Example: Set Transmit LBO=7.5 dB
ED − T1::::::WSTTXLBO=7.5;
RTRV-T1 Command
This command is used to query the provision settings on the PROACT unit
Command:
RTRV − T1:::<ctag>:::<optnm>;
Valid Response:
<cr><lf>
<lf>
^^^SJPM^YY
− MM − DD^HH:MM:SS<cr><lf>
M^^<ctag>^COMPLD<cr><lf>
^^^<optnm>=<optstg><cr><lf>
;
List of Options
This is a comprehensive list of command line options. Simply use the codes identified in the columns below when
configuring command lines.
OPTION OPTNM OPTSTG
Monitored Line Coding WSTLMONLC B8ZS, AMI
CLOS Response WSTCLOSRSP NONE, LB, Idle, AIS, AIS-CI
RAI-CI Option WSTRAICI DIS, ENA
Real Time PM Mode WSTRTPM NONE, NPRM, SPRM
CPE-to-FAC Regen WSTTRMTRGN DIS, ENA
FAC-to-CPE Regen WSTRCVRGN DIS, ENA
Loopback Timeout WSTLBTO DIS, 20, 60, 120, 24HR
Addressable Loopback Mode WSTLBMODE NORM, ADDR
Circuit ID WSTCKTID < ASCII string up to 20 characters >
Reset All Options to Default WSTSDEF ( NA )
FAC-to-CPE Level (RTRV Only) WSTRCVLVL < nn.n >dBdsx
CPE-to-FAC Level (RTRV Only) WSTTRMTLVL < nn.n >dBdsx
Transmit Path LBO WSTTRMTLBO 0, 7.5, 15, 22.5, AB15, AB22.5
CPE-to-FAC Auto Binder LBO WSTBNDRLVL <nn.n>dB
Frame Conversion WSTFCNV DIS, ENA
Example: Query Transmit LBO setting
RTRV − T1::::::WSTTXLBO;
Figure 28. Appendix C − NIU Query and Responses Via TL1 Commands