030-300381 Rev. A
96
January 2004
UltraLine Home DSL Router (Models 7400, 7401)
User Guide
12.5.4 Route
The following settings will be displayed if you select
Route
from the
Advanced WAN
menu.
To add a Route, enter a
Netmask
address, or check the
Host Route
box. Click on the
add
button to establish a static
route.
IP Interfaces
IP Interfaces
The list of active interfaces on the Router and their IP address and mask.
Eth0 is the local LAN interface.
Lo0 is the loopback interface.
MainPPP is the main protocol interface.
Address
The IP interface address.
Netmask
The IP interface netmask address.
Name
The IP interface device name.
Network Routing Table
Network Routing Table
The list of network routes. These can be either routes for directly connected
interfaces or static routes.
Destination Address
The IP address or subnet of the Route.
Netmask
If the Route is a network route, netmask is used to specify the subnet mask.
If the Route is a Host route, then the Host Route check box is used.
Gateway
Indicates were to send the packet if it matches this route.
