background image

 

 

 

 

 

 

030-300381 Rev. A 

108 

January 2004 

 

UltraLine Home DSL Router (Models 7400, 7401) 

 

User Guide 

14.2 Firewall Log 

 
The following settings will be displayed if you select 

Firewall Log

 from the 

Maintenance

 menu.  

 

This screen is an advanced diagnostics screen. It alerts you of noteworthy information sent to your Router from the 
Internet. The screen can contain 1000 entries, but a maximum of 50 entries are displayed at a time. Once 1000 
entries have been logged, the oldest entry is removed to make space for the new entries as they occur. The following 
settings are displayed. 
 

 

 
 
Packet 

The packet number. 

Date 

The number of days passed since that the packet was sent. 

Time 

The time that the packet was sent. 

Direction/Source 

The direction of transmission. 

Rule/Reason 

The internal rule that caused the logged event. The internal rule is set up under 
Firewall rules. 

Alert 

Displays a description of the logged event. 

 

 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Westell UltraLine 7400


























































































































































Reviews: