25
FEATURE SELECTION JUMPER BLOCK OVERVIEW
The
RIGblaster duo
has great flexibly for controlling how you might wish your station to work. In
addition to the three microphone jumper blocks that allows the
RIGblaster duo
to operate with
almost any radio or microphone, there are seven other jumper blocks to allow you to customize the
features and functions.
For most operators the default settings of the jumper blocks will be the best choice. If you like the
default operation of your new
RIGblaster duo
, just leave everything alone. However, if you know
how you would like your station to work, you would like to know what your options are, and you like to
experiment………. read on.
If you lose track of what you did while experimenting, here is a diagram of the default jumper settings.
DEFAULT SETTINGS: FEATURE SELECTION JUMPERS, DIAGRAM
MIC ELECTRET BIAS JUMPER – P8
The P8 jumper block enables “MIC BIAS” required to use an electret microphone, or disables it for a
dynamic mic. By default there is a blue jumper installed which enables bias to power an electret mic.
This is compatible with a dynamic mic but if you are absolutely positive that your microphone has a
dynamic element, not electret, you may remove this jumper. Leaving the jumper on will not noticeably
effect the performance of most dynamic mics but removing it will totally disable an electret mic.
Summary of Contents for RIGblaster duo
Page 19: ...19 ...