9
PANEL DESCRIPTION continued
REAR PANEL
“RECEIVE AUDIO IN/OUT” RECEIVE AUDIO MONITORING CONNECTIONS
- “SPKR OUT” - SPEAKER OUTPUT
- Stereo 1/8 MINI JACK - for connection to either a pair of 4-16 ohm
speakers or to a pair of amplified speakers: any computer or communications speakers of your choice.
CAUTION: use only a stereo plug.
- “PC IN” - COMPUTER AUDIO INPUT
- Stereo 1/8 MINI JACK - Plug the line output of your desktop
computer into this jack. Use headphone output on a laptop computer.
- “RADIO B IN” - RADIO B AUDIO INPUT
- Stereo 1/8 MINI JACK - for connection to the radio’s speaker
output to monitor the radio. May be mono (tip, sleeve) or stereo (tip ring and sleeve). This is a stereo input that
with internal jumpers may be assigned to left, right, both (dual mono, default) or stereo (dual receive).
- “RADIO A IN” - RADIO A AUDIO INPUT
- Stereo 1/8 MINI JACK - for connection to the radio’s speaker
output to monitor the radio. May be mono (tip, sleeve) or stereo (tip ring and sleeve). This is a stereo input that
with internal jumpers may be assigned to left, right, both (dual mono, default) or stereo (dual receive).
- “RCV OUT” - RECEIVE MONITOR OUTPUT
- Stereo 1/8 MINI JACK – for connection to the computer
sound Line Input (Mic input on a laptop). To monitor either or both radios using Amateur Radio sound card
software. The default configuration is to monitor whichever radio/radios are selected for headphone monitoring.
Using internal jumpers it may also be configured so one radio is fed to the left channel, and the other to the right
channel, in stereo, so that they may be selected by the sound card balance control.
“LEDS” READY TO TRANSMIT INDICATOR CONNECTIONS
- “XMIT LED B” RADIO B XMIT LED INDICATOR
OUTPUT - 1/8 MINI JACK - for connection to an external
accessory LED indicator to be placed near the corresponding radio to make it obvious which radio is selected and
ready to transmit. (This must be used with the correct accessory LED indicators otherwise damage may occur!)
- “XMIT LED A” RADIO A XMIT LED INDICATOR OUTPUT
– 1/8 MINI JACK – for connection to an external
accessory LED indicator to be placed near the corresponding radio to make it obvious which radio is selected and
ready to transmit. (This must be used with the correct accessory LED indicators otherwise damage may occur!)
“RIG: MIC/PTT” RADIO MIC OUTPUT AND PTT SWITCH INPUT CONNECTIONS
- “PTT IN” – PTT SWITCH INPUT JACK
- RCA PHONO JACK - for connection to an auxiliary foot switch or
desk mounted switch that is not part of the main station microphone.
- “MIC OUT B” – RADIO B MICROPHONE OUTPUT
- RJ45 MODULAR JACK – for connection to the
Microphone connector on radio B. This connection is made using one of the included Mic Cables or an optional 6
foot mic cable.
- “MIC OUT A” – RADIO A MICROPHONE OUTPUT
- RJ45 MODULAR JACK – for connection to the
Microphone connector on radio B. This connection is made using one of the included Mic Cables or an optional 6
foot mic cable.
Summary of Contents for RIGblaster duo
Page 19: ...19 ...