3
B
EFORE
U
SING FOR THE
F
IRST
T
IME
Please check all packaging material carefully before discarding. Many accessory parts are
contained within the packaging material. Your Arctic Pops™ Maker includes 8 Arctic Pops™
sticks, 4 drip cups, and 1 removal tool.
Follow directions in “Cleaning your Arctic Pops™ Maker” section of this manual to clean Arctic
Pops™ maker. Make sure the Arctic Pops™ mold is thoroughly dried after cleaning. Water will
freeze inside the mold and make ice pop removal almost impossible.
Place clean, dry Arctic Pops™ maker in the freezer upside down for 24 hours. Your freezer must be
set to 0°F or lower for proper freezing of the mold.
U
SING
Y
OUR
A
RCTIC
P
OPS
™
M
AKER
1. Remove Arctic Pops™ maker from the freezer. Shake gently; if you hear sloshing, it is not
completely frozen. Place back in the freezer and freeze longer; at least one hour. Check to
make sure your freezer is set to 0°F or lower.
Removal Tool
Mold Openings
Drip Cup
Arctic Pops™ Stick
