5
Before beginning assembly, carefully read the
following information and instructions:
•
Assembly requires two people.
•
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
•
Tighten all parts as you assemble them, unless
instructed to do otherwise.
•
As you assemble the weight system, make sure
all parts are oriented as shown in the drawings.
•
For help identifying small parts, use the PART
IDENTIFICATION CHART.
The following tools (not included) are required
for assembly:
• two adjustable spanners
• one rubber mallet
• one standard screwdriver
• one Phillips screwdriver
• lubricant, such as grease or petroleum jelly,
and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end span-
ners, or a set of ratchet spanners.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight system can be assembled suc-
cessfully by anyone. However, it is important to
realise that the versatile weight system has
many parts and that the assembly process will
take time. Most people find that by setting aside
plenty of time, assembly will go smoothly.
ASSEMBLY
1
2
68
59
59
Indent
Indent
These holes
are smaller
than on the
opposite side.
1.
Orient the Stabiliser (2) as shown with the indents
around the holes on the bottom. Attach the Base
(1) to the Stabiliser with two M10 x 65mm
Carriage Bolts (59) and two M10 Nylon Locknuts
(68).
Do not tighten the Locknuts.
Insert two M8 x 63mm Carriage Bolts (58) into
the bottom of the Base (1).
Note: It may be help-
ful to place tape over the bolt heads to hold
them in place.
FRAME ASSEMBLY
Before beginning assembly, be sure that
you have read and understand the infor-
mation in the box above.
1
58
Summary of Contents for Gym 750
Page 19: ...19 NOTES ...
