Weslo Gym 750, User Manual

Page: 10 / 24

10
16.
Locate the Press Cable (49).
Slide the Cable
onto the hook on the Left Arm (7).
17. Apply grease to an M10 x 78mm Bolt (54). Attach
the Pulley Arm (38) to the Upright (3) with the Bolt
and an M10 Nylon Locknut (68).
Do not over-
tighten the Locknut; the Pulley Arm must be
able to pivot easily.
Wrap the Press Cable (49) over a 90mm Pulley
(34). Attach the Pulley, a Cable Trap (36), an M10
Washer (70), and two Finger Guards (35) to the
indicated side of a Pulley Arm (38) with an M10 x
52mm Bolt (52) and an M10 Nylon Locknut (68).
Make sure that the Cable Trap is oriented to
hold the Cable in the groove of the Pulley.
15. Attach the end of the High Cable (50) to the
Small “U”-bracket (11) with an M8 Washer (71)
and an M8 Nylon Locknut (69).
Note: Do not
completely tighten the Locknut; it should be
threaded onto the Cable so that two threads
show past the Locknut, as shown in the inset
drawing.
Attach the Small “U”-bracket (11) to the Weight
Tube (12) with an M8 x 45mm Bolt (60) and an
M8 Nylon Locknut (69).
Do not overtighten the
Locknut; the Weight Tube must be able to
pivot in the Small “U”-bracket.
14. Wrap the High Cable (50) over a 90mm Pulley
(34). Attach the Pulley and two Finger Guards
(35) to the Top Frame (4) with an M10 x 46mm
Bolt (53) and an M10 Nylon Locknut (68).
68
50
34 35
35
4
53
14
11
71
60
69
12
15
7
35
35
34
68
16
17
50
69
11
49
Hook
70
49
36 38
52
54
3