Weslo 831.29763.0 Manual Download Page 5

Page: 5 / 24

M10 Split

Washer (45)–4

M10

Washer (83)–2

M8 Locknut

(38)–8

Small Wave

Washer (69)–2

M5 Split

Washer (28)–6

M8 x 25mm Patch

Screw (56)–2

M8 Washer

(55)–2

M6 Bolt Set (25)–2

Large Wave

Washer (76)–2

M4 x 16mm

Self-tapping

Screw (52)–12

M10 x 78mm Button

Bolt (34)–4

M10 x 20mm Patch

Screw (7)–4

M10 x 25mm

Patch Screw (40)–2

M8 x 80mm Patch

Bolt (79)–2

M8 x 43mm Button

Bolt (50)–6

#10 x 16mm

Screw (27)–6

ASSEMBLY

Assembly requires two persons.

Place all parts of the elliptical in a cleared area and remove all packing mate-

rials; do not dispose of the packing materials until assembly is completed.

In addition to the included tool(s), assembly requires a Phillips screwdriver

, an adjustable

wrench

, and a rubber mallet

See the drawings below to identify the small parts needed for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST near the end of this manual. The number following

the key number is the quantity needed for assembly.

Note: If a part is not in the hardware kit, check to see if

it has been preassembled. If a part is missing, please call 1-866-699-3756. To avoid damaging parts, do

not use power tools for assembly.

Summary of Contents for 831.29763.0

























Search results

Summary of Contents for 831.29763.0

Reviews:

Related manuals for 831.29763.0

Brands by name

Popular brands

Weslo 831.29763.0, Manual

Search results

Summary of Contents for 831.29763.0

Reviews:

Related manuals for 831.29763.0

Brands by name

Popular brands