13
16. Identify the Right Pedal (14) and the Right
Pedal Arm (12), which are marked with “Right”
stickers, and orient them as shown.
Attach the Right Pedal (14) to the Right Pedal
Arm (12) with three #10 x 16mm Screws (27)
and three M5 Split Washers (28).
Assemble the Left Pedal (not shown) and
the Left Pedal Arm (not shown) in the same
way.
16
Grease
Arrow
8
6
26
47
69
2
55
81
56
46
12
14
28
27
15
15. Insert the Pivot Axle (26) into the Upright (2),
and center the Pivot Axle.
Apply a generous amount of the included
grease to both sides of the Pivot Axle (26).
Orient an Upper Body Arm Spacer (47) so that
the arrow points toward the floor. Slide the
Upper Body Arm Spacer onto the right side of
Pivot Axle (26).
Slide a Small Wave Washer (69) onto the Pivot
Axle (26). Then, slide the Right Upper Body
Arm (8) onto the Pivot Axle.
Attach the Right Upper Body Arm (8) with an
M8 x 25mm Patch Screw (56) and an M8
Washer (55).
Slide the right Upper Body Arm Cover (81)
upward. Then, press the tabs on an Axle Cap
(46) into the Upper Body Arm Spacer (47).
Slide the Upper Body Arm Cover (81) down-
ward to cover the M8 x 43mm Button Bolts (not
shown).
Repeat this step on the other side of the
elliptical.
