WESAUDIO
3/15/17
_MIMAS USER MANUAL REV4
16
6.2.2.
GConBlackBox
GConBlackBox plugin is generic recall plugin. It doesn’t implement any controls, it was created to
easily recall large amount of units.
How does it work?
Just start your session and create one instance of GConBlackBox plugin on any track/aux. It will
automatically connect to any GCon hardware currently available and synchronize its parameters. From
now on, any change of parameter through a hardware front panel will be notified to GConBlackBox
plugin. There are many possible use cases, please go through few examples:
When fast session preparation is a requirement – just load the session and create one instance
of GConBlackBox to have total recall of all your units.
During recording session, when plugin control is not really necessary (GConBlackBox can be
inactivated after recording is over – it can be re-activated if necessary in the future)
To recall large amount of units – when during such session there is a need for some automation
moves, dedicated plugin can still be started on top of GConBlackBox (its state will be
synchronized with GConBlackBox upon connection with a hardware).
