WESAUDIO
3/15/17
_MIMAS USER MANUAL REV4
18
6.3.2.
Direct output
WesAudio devices and plugin management functionalities are perfect solution for hybrid mixing,
when on some stage signal is sent to the analog world and summed outside DAW. In that approach:
3)
Connect your HW with your machine using USB cable and USB 2.0+ port in your workstation
(**) or _Titan rack frame.
4)
Insert on your track WesAudio plugin which matches with your HW and select your device from
drop down list.
5)
Set up track/aux output to audio interface output which routes signal to the WesAudio device.
From now on you can use automation and recall features in analog domain!
* THIS IS IMPORANT ONLY FOR AUTOMATION & SIDE CHAIN FEATURE: In practice audio signal and
plugin parameters are mediated through whole insert chain in order, so by keeping Plugin after external
effect could cause small latency (equal audio interface latency) which is causes by ASIO buffer setting (it
is most pessimistic case and most probably it would be anyway smaller, but it depends on HOST(DAW)
implementation). In simpler worlds such latency would be exactly the same, as time which is need to get
audio to your audio interface and back. Keeping your plugin before external effect, would “compensate”
this unwanted effect, and your device will apply parameters before audio signal gets through it.
** PLEASE NOTE: Officially supported interface is USB 2.0 – please check your USB HUB to be
compatible with this particular USB revision.
