- -
- 24 -
shaft of the wheel balancer as done in the previous step. Close the wheel guard and press
START
to spin the second measuring cycle.
Fig. 18 - Optimization – measure tire and rim
At the end of the spin, at the top side of the screen, will appear “PROFIT” and at the bottom side of
the screen , will show the unbalance value which it will be possible to delete with the Optimization
process.
Mark with a choke, 2 points indicated by the machine on the rim (on left screen side) and on the
tire (on right screen side) Demount the wheel from the machine and match 2 choke marks
between rim and tire.
Re-mount the wheel on the machine and pressing
ESC
key, come back to main menu where it will
be possible, balance again the wheel.
21
