F. Pitch Bend Down
⌂
Movement in the pitch bend pedal sends corresponding pitch bend
messages of range 0-8000
G. WMI Modulation
For future use with special Wernick Pedal!
H. Modulation Up
⌂ Movement in the pedal sends corresponding control change 'Modulation'
messages of range 8000-16000.
I. Modulation Down
⌂ Movement in the pedal sends corresponding control change 'Modulation'
messages of range 0-8000.
J. Programme Up
⌂
Press on pedal increases programme number on sound source by 1 - for
use with special software such as FORTE
K. Programme Down
⌂
Press on pedal decreases programme number on sound source by 1 - for
use with special software such as FORTE.
L. CC Message
⌂ Press on pedal allows control of most control change messages
implemented in MIDI
A. CC Number
– choose CC message number using octave shift button.
B. Data Range
- choose data range using octave shift button.
M. Drum Trigger
⌂
Sets expression input as a drum trigger allowing the drum pad to play
notes which differ in settings to the base instrument.
Go to
Q.
Trigg Settings
to set parameters.
N. Sensitivity
⌂
Press on pedal allows control of sensitivity knob on a foot pedal.
O. Channel Pressure
⌂
Midi function known as channel pressure.
P. Key Pressure
⌂
Midi function known as key pressure.
PRESS 'EXIT' AT ANY TIME TO GET OUT OF A SCREEN (AND AGAIN FOR PERFORMANCE MODE!).
V. Jacks 5 & 7 Function
◄ Digital Pedal 5 ►
A. Octave Up
⌂
Shift keyboard up an octave (12 notes)
B. Octave Down
⌂
Shift keyboard down an octave (12 notes)
C. Programme Up
⌂
Increases programme number on sound source by 1.
D. Programme Down
⌂
Decreases programme number on sound source by 1.
E. Toggle Overlay
⌂ Patch with overlay set – turn overlay off/on
F. Toggle Dampening
⌂ Patch with dampening level set – turn dampening off/on
G. Patch Up
⌂ Allows foot control of patch up.
H. Patch Down
⌂ Allows foot control of patch down.
I. Semitone Shift
⌂ Will shift keyboard by number of semitones selected. -36 to +36
W. Advanced Settings
A. to X.
Not all sound sources
will accept all CC
messages.
These are presets (MIDI control change CC
messages) to set up a sound module when you
change patch.
X. Fine Tuning (%)
+50 - OFF -50
9.4 Patch Template
This is a template for copying changes to multiple patches such as transposing all your
patches to a different key or setting minimum velocity. It is the same list as the for patch
settings.
1.
Select the item in the list you want to change using the up/down patch buttons.
2.
Select your change using the left/right octave shift buttons.
3.
Press SAVE (if you have
gone into a second screen such as for jack inputs press exit first to get back to main patch
template screen) and follow the instructions – select ALL to change all 200 patches or
select SELECTED and choose patches using up/down arrows and left/right arrows
⌂
.
4.
Press SAVE and then a fresh template screen will appear.
5.
Make another change or
EXIT into Performance Mode.
12
