Automatic sauna splash system, type Sauna Plus 8 Basic
Index: 02
Date modified: 22/02/2022
OI No.: BA DW 010-02 Sauna Plus 8 Basic EN.docx
Page 13 of 36
4
Installation
The tasks described here must only be performed by appropriately qualified personnel from a specialist
company.
4.1
Select the installation site
The installation site must have the following properties:
1.
The installation site must be frost-proof.
2.
The system must be protected from direct sunlight.
3.
An electrical power connection with a safety contact is required.
4.
It is recommended that the storage space be well aerated and ventilated.
5.
A waste water connection must be available. (Only necessary for version with system separation)
4.2
Installation instructions (assembly suggestion)
The automatic sauna splash system is installed on a wall in the technical room. The line to the sauna
heater should be as short as possible. Pay attention to the space required for operation and maintenance
of the device, see Chapter 3.4 Technical data.
Warning and information notices must be installed in compliance with locally applicable accident pre-
vention regulations at the locations provided!
Installation plan, draining splash line
Figure 10, Installation plan 1
Technical room
Cabin
Cab
in
wall
Oven
shower
head
Sauna
heate
r
G
rad
ie
n
t:
1 c
m p
er
1 m li
n
e le
n
gt
h
In
le
t
