werma AndonWireless, Manual

Page: 53 / 118

4 Configuring the Andon Wireless BOX
The configuration determines the status that will be displayed by the individual tiers of the signal
tower after a button has been pressed on the Andon Wireless
BOX . In addition, it is possible to
determine the colour of each individual button and whether the buttons continue to light up after
a button has been pressed.
If both Andon Wireless BOX es are used with 2 and 5 buttons, WERMA recommends con-
figuring the Andon Wireless BOX with 5 buttons and exporting the configuration first, see
" Exporting the configuration to a configuration file ", S. 67. This ensures that the exported con-
figuration file also contains the desired settings for tiers 3 to 5.
1. Use the USB cable supplied to connect the Andon Wireless BOX to the computer.
The Andon WIRELESS configuration software detects the Andon Wireless BOX .
If necessary, the required drivers are installed by the Windows update. If the driver installation
fails, the drivers can be installed manually, see "
Manual driver installation ", S. 72.
If the Andon Wireless BOX has not yet been configured or has been reset to the factory set-
tings, the New Device Setup window appears.
If a configuration has already been created and saved, this configuration can be imported
or a new configuration can be created.
If no configuration has been saved yet, the settings can be read and exported from an
Andon
WIRELESS device that has already been configured.
Version: 1.1 - 09/2021 53
EN