werma AndonWireless, Manual

Page: 57 / 118

2. For each tier of the signal tower, select the status after pressing the button briefly ( short press )
and after pressing the button for longer ( long press ).
Status Description
Keep current state
– Retain the current status of the tier.
Off
– Switch off the tier.
On
– Switch on the tier.
Blink
– Let the tier blink.
Flash
– Let the tier flash.
Toggle Off/On
– Toggle between: Off <-> On
– Switch off the tier if the tier is switched on, blinks or flashes.
– Switch on the tier if the tier is switched off.
Toggle Blink/Off
– Toggle between: Blink <-> Off
– Let the tier blink if the tier is switched on, switched off or flashes.
– Switch off the tier, if the tier blinks.
Toggle Flash/Off
– Toggle between: Flash <-> Off
– Let the tier flash if the tier is switched on, switched off or blinks.
– Switch off the tier if the tier flashes.
Toggle On/Blink
– Toggle between: On <-> Blink
– Switch on the tier if the tier is switched off, blinks or flashes.
– Let the tier blink if the tier is switched on.
Same as short press
– Accept the status of the short press setting.
The Configuration examples (see "Configuration examples" , S. 73) shows a few examples of
possible practical configurations.
Version: 1.1 - 09/2021 57
EN