WERKU WK403210, Original Instructions Manual

Page: 4 / 32

English
ENG
ORIGINAL INSTRUCTIONS
4
ADDITIONAL SAFETY WARNINGS.
Do not use this projector with a cracked or broken
protective glass (2). Ensure a minimum distance
of 1 meter between the light output and the area
to be illuminated (3). Do not expose this projector
to rain or wet conditions. Place the projector on a
flat, horizontal, hard surface. Be sure to constantly
set up a stable positioning (4). The projector
produces heat and may cause burns and/or fires.
Do not cover the projector when switched on. Do
not look directly into the light beam. Do not direct
the light beam towards other people or animals.
This projector belongs to protection class I and it
is essential that it is earthed. When operating this
projector outdoors, use an extension cord suitable
for outdoor use.
TURNING ON.
Plug on this projector. As this projector is not
equipped with an on/off switch, the light beam
appears when you connect the power cord to the
mains outlet.
SWITCHING OFF.
Remove the mains plug. As this projector is not
equipped with an on/off switch, it is necessary to
disconnect from the mains.
MAINTENANCE.
The projector has been designed for a long
working life with minimum maintenance. Optimum
use depends on correct care of the projector and
regular cleaning. To prevent accidents, always
unplug the projector from the power source
before cleaning or performing any maintenance.
The projector may be cleaned effectively using
compressed air after each use. If compressed air
is not available, use a brush to remove dust from
the projector. Motor ventilation vents and switch
levers must be dept clean and free of foreign
matter. Do not attempt to clean by inserting pointed
objects through openings. Certain cleaning agents
and solvents damage plastic parts, among them
are gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household
cleaners containing ammonia. Do not use any of
these to clean the projector. The LED can not be
replaced. Perform a thorough cleaning after each
use to avoid waste accumulation on the projector.
An immediate cleaning prevents the formation of
an agglomerate that will be more difficult to remove
later. The projector must be kept clean to avoid
premature deterioration and wear. Periodically,
depending on frequency of use, check all screws
and tighten them if necessary.
TRANSPORT/STORAGE.
Unplug the power cable. Wait for the projector to
cool down completely. Store the projector so that it
can not be used by an unauthorized person. Store
the projector in a dry and protected place.
ENVIRONMENT PROTECTION.
The materials and components that have been
used to manufacture this product can be re-used
and recycled. Werku
®
is adhered to an Integrated
Management System that is in charge of the correct
elimination of the residues of this product. Do not
eliminate this product with domestic residues.
Werku
®
offers to its clients a free collection service
of these residues through any of its sale points, or in
the collection points established by the Integrated
Management System or in the recycling point of
your locality.
WARRANTY AND TECHNICAL SERVICE.
Apart from the legal guarantee, Werku
®
offers an
additional commercial guarantee. This commercial
guarantee covers the repair of all defects found
due to faults in the materials or manufacture. For
this cover to be effective it is necessary for these
defects to appear within the validity period. The
consumer is entitled to free repair of all defects that
Werku
®
recognises as included in the commercial
guarantee (shipping costs, labour costs and
materials included) as chosen by Werku
®
, either
via the repair or by replacement (if necessary
with a later model). This commercial guarantee
does not affect consumer’s rights established
by law according to Directive 1999/44/CE. This
commercial guarantee is valid for 24 months. If this
product is destined for professional or industrial
use, the validity period is 12 months. The validity
period starts on the date of purchase by the first
consumer. This date is shown on the invoice or
receipt of purchase. Actions for claims against this
commercial guarantee expire six months from the