WERKU WK403160, Original Instructions Manual

Page: 4 / 44

English
ENG
ORIGINAL INSTRUCTIONS
4
STORE POWER TOOLS.
Store power tools out of reach of children and not
allow the handling of power tools to people unfamiliar
with the tools or these instructions. Power tools are
dangerous in the hands of untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding, there
are no broken parts or other conditions that may affect
the operation of power tools. Power tools are repaired
before use when they are damaged. Many accidents
are caused by poorly maintained power tools. Use
power tools, accessories and tool tips, etc. according
to these instructions and in the manner provided for the
particular type of power tool, taking into account the
conditions work and work to develop. The use of the
power tool for applications other than those intended
could result in a dangerous situation. Please check
your power tool serviced by a Werku
®
official repair
service using only identical replacement parts. This
will ensure the safety of the power tool is maintained.
CHECK CONDITION.
Make sure that all the screws in this power tool are
perfectly tightened. In cold climates or when this
power tool has not been used for a period, allow this
power tool to warm up by leaving it to run empty for a
few minutes, to ensure that all internal components
are perfectly lubricated. Make sure that the possible
installed accessories are perfectly fitted in place.
BEFORE STARTING WORK.
Make sure that this power tool is firmly supported
before using. Check that no one is standing
beneath you when using this power tool in high
areas. Keep your hands away from all moving
parts of this power tool.
DURING THE OPERATION.
Do not leave this power tool operating without having
it firmly fixed. Only turn it on when you are sure you
have full control over it. Do not point this power tool
at anyone while in use. When operating this power
tool will produce vibrations. The screws may gradually
come loose, and possibly cause faults or accidents.
Keep your hands away from all moving parts of this
power tool.
AT FINISH WORKING.
Do not touch the possible accessories installed in this
power tool after use. It may be hot and cause burns.
Some materials worked with may contain chemicals
or toxic components. Avoid inhaling these substances
or allowing them to come into contact with your skin.
Use PPE designed to prevent and protect against
incidents of this kind.
DESCRIPTION OF THE PRODUCT.
The reciprocating saw has been designed to carry out
jobs of cutting on wood, metal and other soft mate-
rials. Refer to this plan to familiarize yourself with the
reciprocating saw before use.
1 2 3 4 5 6
1. Pivot shoe.
2. Quick-release blade clamp.
3. Position regulator button.
4. ON/OFF switch trigger.
5. Lock-on button.
6. Main handle.
USE INSTRUCTIONS.
Before starting up the reciprocating saw, we recom-
mend that you carefully read all of the instructions
as indicated. Please respect all regulations regar-
ding the prevention of accidents, health and safety
directives, laws and applicable restrictions for work
places. The reciprocating saw must only be used
by persons who have been instructed in its use and
only for the purposes for which it has been designed.
POWER SUPPLY.
Make sure the power supply is adapted to the re-
quirements shown on the information panel of the
reciprocating saw (1). Using the motor at low volta-
ge will make it operate slowly. This will reduce per-
formance and may cause the motor to overheat.
EXTENSION CORD.
If the working area is at some distance from the
power supply, use an extension cord of enough dia-
meter and quality.