background image

39

10. Maintenance Instructions

This wenglor switch is maintenance-free.
Do not use any solvents or cleaning agents that could damage the device when cleaning the switch. 
The following gives a brief overview:

• Always use clean water for cleaning by using neutral detergents together with a soft, non-scratch, non-

abrasive and non-fibrous cloth – strong pressure or rubbing must be avoided.

• Coarse soiling of greasy, oily or sooty surfaces and the removal of adhesive residues can be cleaned 

using aromatic-free white spirit or isopropyl alcohol (IPA).

• Use cleaning agent at a maximum of 25 °C.
• Never use steam cleaners.
• Never use solvents with aromatic compounds, alcohol, ketones, ester, glycol ether or halogenated hydro-

carbons for cleaning.

• When cleaning with liquids, all open ports must be locked with the protective caps provided.

11. Proper Disposal

wenglor sensoric GmbH does not accept the return of unusable or irreparable products. Respectively valid 
national waste disposal regulations apply to product disposal.

12. EU Declaration of Conformity

The EU declaration of conformity can be found on our website at www.wenglor.com in download area.

Summary of Contents for ZAC5 EN0 Series









































Reviews: