background image

40

EN

The wenglor sensoric GmbH hereafter called wenglor for short, points out that notes and information in this 
operating manual may be subject to constant development and technical changes and are therefore only pub-
lished under reservation.

This operating manual does not represent a promise by wenglor with regard to the described processes or spe-
cific product characteristics. wenglor does not assume liability for printing errors or textual errors. wenglor shall 
only assume liability if it can be proved that wenglor had knowledge about for the errors in question at the time 
of creating the operating manual. This operating manual is only a general description of technical processes 
whose implementation does not apply to every individual application. If you have specific questions regarding 
this, you can always contact our technical support.

The information in this operating manual can be changed without advance announcement. No part of this docu-
ment or extracts from it may be copied, reproduced or translated into another language without the prior written 
permission of wenglor sensoric GmbH.

© 12.09.2016
wenglor sensoric GmbH
www.wenglor.com

Summary of Contents for ZAC5 EN0 Series









































Reviews: