Wenglor weCat3D MLSL, Operating Instructions Manual

Page: 14 / 71

14 Technical Data
4. Technical Data
Order No.
Technical Data
MLSL MLWL
Electrical Data
Supply Voltage 18...30 V
Current consumption (Ub = 24 V) 1 300 mA 300 mA
Measuring rate 200…4 000 Hz 175…6 000 Hz
Measuring rate (subsampling) 800... 4 000 Hz 2 350...6 000 Hz 3
Temperature range 0...45 °C
Storage temperature −20…70 °C
Number of I/Os 4
Switching Output Voltage Drop < 1,5 V
Switching Output/Switching Current 100 mA
Can be switched to NC or NO operation yes
PNP / NPN / push-pull yes
Short-circuit proof yes
Reverse polarity protected yes
Overload-proof yes
Interface Ethernet TCP/IP
Transmission speed 100/1000 MBit/s
Protection class III
Integrated web server yes
Mechanical Data
Housing Aluminum/Plastic Aluminum
Degree of Protection 4 IP67
Connection Type M12×1; 12-pin.
Ethernet connector type M12×1; 8-pin.
External 24 V laser shutdown 5 M12×1, 8-pin ---
Optic Cover Plastic Glass
1 Increased current consumption (1000 mA) for weCat3D MLWL and MLSL2 with laser class 3B.
2 Subsampling in X and Z
3 Subsampling in Z
4 Only when the cable is connected
5 Only MLSL2 with laser class 3R and 3B
NOTE!
The warm-up phase lasts roughly 15 minutes.