P11/12
uSer SaFety
Do not modify or dismantle all or part of the product.
respect the power supply voltages and the connection terminals.
ensure power supply is switched off whilst connecting product and turn on only once product is fully
connected. Failure to do this may damage the product and invalidate the warranty
Do not stare at the lighting source directly.
Follow advice below for installation to minimise operator exposure to the light source.
INSTALLATIoN GUIDANCE:
• Forbid or limit the direct access to the lighting source (exposure into the radiation axis).
• Establish a security perimeter to prevent the operators from approaching the lighting source beyond the recom-
mendations of the manufacturer.
• If the workstation permits it, introduce a filter that will stop the lighting radiation under a fixed or adjustable
frame between the source and the operator. When these measures cannot be implemented, supply the opera-
tors with glasses (class 4) or with a dedicated protective mask, that will stop the lighting radiation.
It is the responsibility of the persons installing this product to ensure that all means possible (such as those stated
above) have been implemented to reduce exposure of the machine operators to the light emitted from this product.
MountIng acceSSory
(oPtional)
Ref: ZMRX001
*Supplied
2x
screws
M5x10*
