Wenglor LMRX Series, User Manual

Page: 8 / 12

lMrXxxx
operatIng InStructIonS
P8/12
65 µs 80 µs
2 µs 25 µs
Change
Colours
LED
Current
65 µs 65 µs
10 µs 10 µs
Sector
Control
LED
Current
colorS SectorS
rising/falling times &
ON/OFF delays when changing colors
rising/falling times &
ON/OFF delays when strobing sectors
with pNp at 24v
To control the LED Color and illuminated Sector, the PNP or NPN trigger signal should be enabled in addition to the
Sector or Color control signal(s). Timing diagrams below illustrate rise, fall and delay times.
If PNP and sectors are connected to 24V and if you strobe colors, there can be some delays between the trigger
signal and the LED current.
If PNP is connected to 24V and you strobe sectors, there can be some delays between the trigger signal and
the LED current. In this configuration, you have protection for maximum 2ms.
StrobIng the lIght vIa color & Sector Input behavIour