background image

WARRANTY STATEMENT

Remember to save the receipt and to accurately fill out and mail the product registration card. Proof of purchase 
is required for all warranty work.

WEN® Generators are under warranty to be free from defects in materials and workmanship for a period of two 
(2) years from date of original purchase. Generators used for Commercial or Rental use have a warranty period of 
90 days from date of original purchase. Keep purchase receipt and mail in the product registration card for proof 
of purchase.

WEN® will repair or replace, at its discretion, any part that is proven to be defective in materials or workman-
ship under normal use during the two (2) years warranty period. Warranty repairs or replacements will be made 
without charge for parts or labor. Parts replaced during warranty repairs will be considered as part of the original 
product and will have the same warranty period as the original product.

To exercise the warranty, DO NOT RETURN TO RETAILER. Instead, call the toll free Customer Service 
number at (800) 232-1195 and you will be instructed on where to take the generator for warranty service. Take 
the generator and proof of purchase (the receipt) to the repair facility recommended by the Customer Service 
Representative. To make a claim under this Limited Warranty, you must make sure to keep a copy of your proof 
of purchase that clearly defines the Date of Purchase (month and year) and the Place of Purchase. Place of pur-
chase must be a direct vendor of Great Lakes Technologies, LLC. Third party vendors such as garage sales, pawn 
shops, resale shops, or any other secondhand merchant void the warranty included with this product.  Contact 
[email protected] or 1-800-232-1195 to make arrangements for repairs and transportation. 

When returning a product for warranty service, the shipping charges must be prepaid by the purchaser. The prod-
uct must be shipped in its original container (or an equivalent), properly packed to withstand the hazards of ship-
ment. The product must be fully insured with a copy of the warranty card and/or the proof of purchase enclosed. 
There must also be a description of the problem in order to help our repairs department diagnose and fix the 
issue. Repairs will be made and the product will be returned and shipped back to the purchaser at no charge.

THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS THAT WEAR OUT FROM 
REGULAR USAGE OVER TIME INCLUDING BELTS, BRUSHES, BLADES, ETC.

The warranty does not extend to generators damaged or affected by fuel contamination, accidents, neglect, mis-
use, unauthorized alterations, use in an application for which the product was not designed and any other modifi-
cations or abuse. Labor for warranty parts is only covered for the contiguous United States (48 states).

WEN® is not liable for any indirect, incidental or consequential damages from the sale or use of this product. 
Any implied warranties are limited to two (2) years as stated in this written limited warranty. Some states do not al-
low the exclusion or limitation of incidental or consequential damages. Some states do not allow limitation on the 
length of an implied warranty. This warranty gives you specific legal rights, and you may have other rights that vary 
from state to state.

30

Summary of Contents for 56202i

































Reviews: