KNOW YOUR IMPACT WRENCH
Carefully unpack the tool from the packaging. Check all components and compare against the diagram below. If
any part is damaged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email us
at [email protected].
Clockwise Rotation (F for Forward)
Counterclockwise Rotation (R for Reverse)
1/2-Inch Drive
(with Cover)
Carbon Brush Cover
(Left & Right Side)
Handle
POWER & DIRECTIONAL SWITCH
The switch of the impact wrench controls both the power and rotational direction of the drive.
• To run the tool in a clockwise direction, press the lower part of the switch (F for forward).
• To run the tool in a counterclockwise direction, press the upper part of the switch (R for reverse).
• To turn OFF the tool, release the switch.
INSTALLING THE DRIVE BIT
The impact wrench is equipped with a quick-connect drive that accepts 1/2-inch drive bits (not included). To
install the drive bit, first turn OFF and unplug the tool. Remove the plastic cover and slide the drive bit over the
drive until it is secured. Always make sure the bit is securely installed before starting the impact wrench.
8